Abandoned screw woodworking blade R-5.5 round blade R-11*4-15 degree carbide planer blade
Long wearing tungsten carbide round cutter inserts are offered in dozens of standard sizes with two or four wear edges, this carbide inserts are the perfect choice for running woods such as Teak, Hard Maple,Ipe and MDF.
1. Product Application:
Round cutter carbide inserts is a form of wood working that is used to create wooden objects on a lathe,carbide wood turning tools can be used to rough out any type of turning from bowls to pens,and spindles. After the roughing is accomplished the tool can be used for sheer scraping to smooth out the surface.
2. Product Picture:
We offer this round carbide insert cutter in various diameter: Φ8.9, Φ11, Φ12, Φ15, Φ16mm etc.
3. Product Specification:
--Optional Grade for wood working
| Grade chioce for carbide reversible knives,indexable knives |
| Type | Grade | Grain Size μm | Cobalt(WT.%) | Density g/cm³ | Hardness HRA | T.R.S N/mm² | Recommended Applicatiom | ISO code |
| Woodworking blades | YG8 | Medium | 8% | 14.8 | 90.5 | 2400 | General wood.hardwood | K20 |
| YG6 | Medium | 6% | 15.0 | 91.0 | 2300 | General wood | K20 |
| VKD016 | Fine | 8% | 14.7 | 91.2 | 2500 | Hard wood | K20 |
| VKD018 | Submicron | 10% | 14.5 | 91.8 | 3200 | Hard wood | K30 |
| VKD007 | Submicron | 7% | 14.7 | 92.9 | 3000 | MDF, HDF | K30 |
Long wearing tungsten carbide round cutter inserts are offered in dozens of standard sizes with two or four wear edges, this carbide inserts are the perfect choice for running woods such as Teak, Hard Maple,Ipe and MDF.
1. Product Application:
Round cutter carbide inserts is a form of wood working that is used to create wooden objects on a lathe,carbide wood turning tools can be used to rough out any type of turning from bowls to pens,and spindles. After the roughing is accomplished the tool can be used for sheer scraping to smooth out the surface.
2. Product Picture:
We offer this round carbide insert cutter in various diameter: Φ8.9, Φ11, Φ12, Φ15, Φ16mm etc.
3. Product Specification:
--Optional Grade for wood working
Material: cemented carbide woodworking machine clip blade, screw blade first manufacturer, using micron granular raw materials, low pressure sintering, to ensure high wear resistance and high bending strength of products, using numerical control and special equipment through 27 processes to cast quality products, the blade large surface is mirror polished state, the edge after three differential treatment, under 100 times magnifying glass without waviness, prolonged the product so that Use time. Provide customers with different material processing solutions.
Applicable equipment: woodworking double-sided planer, four-sided planer, vertical shaft machine, copying machine
Processing range: solid wood, plywood, dense plate, acrylic, plastic,
.
